Lumonite D-Moto transducer

12V transformer suitable for Lumonite DX lamps! Allows for fixed installation, e.g. on an ATV, etc. 12V system.

Connect the (+) and (-) wires to the power source. The fuse box with fuses is located directly on the power cable coming from the battery. Connect the lamp to the transformer connection and turn on the lamp - EASY. If necessary, a DX extension cable can be connected between the lamp and the transformer, allowing the lamp to be placed further away from the power source.

Examples of uses:

• ATV additional lights
• Enduro / Motocross / motorcycle / snowmobile helmet light powered directly from the vehicle
• Compact additional lights for any vehicle with a 12V system
• Work light for applications where a small size but high power is required from the lamp

Transformer specifications:

• Voltage input: 12 - 17V
• Voltage out: 19V + - 0.2V
• Max. output current: 3A (1 DX5000 light head at full power)
• High quality transformer
• Cord length: approx. 50 cm + 30 cm
• Plastic-molded waterproof construction
• Warranty: 12 months

Quick guide:

Coupling:

- Red: Plus (+)
- Black: Minus (-)

DX series luminaire head for connection to its own output connector. Secure the transformer appropriately to the installation site, e.g. with screws or double-sided tape.

Note! Connecting this product requires basic electrical knowledge. A few reminders:

• Always connect electrical devices to a fuse of the appropriate size.
• Use relay connection if necessary
• Make sure the cables are of sufficient thickness
• If you install the device behind an existing fuse, ensure the fuse is of the correct size and sufficiency!
• If you want to install the luminaire far from the transformer, use only Lumonite DX series extension cables for the DX series luminaire - Not all cables that look the same have sufficiently thick conductors inside.

You can put the power supply control behind a button, for example. Use a relay if necessary if the current rating of the button/switch is not sufficient for the transformer you have chosen. Tip: You can also take control from the vehicle's own lights.