Reviews

— Show original

Relatively loud, for better or for worse. Loosens from time to time.

— Show original

Easy to install even by yourself and nice sounds.

— Show original

Good Muzzle Brake coated on the gun.

— Show original

It works well, although the protective nut of the jengos disappeared somewhere on the track due to loosening

— Show original

The recoil was substantially reduced. The hits shifted 0.3 milliradians to the left, but that's not a problem. Just a note.

Quite effective

— Show original

An efficient tool and easy to set the tool at the right angle.

— Show original

Rotates by itself when the screw is loosened. The muzzle brake is ok and a domestic product. Acquired with a muffler in mind.

Ok

— Show original

Powerful brake, easy and fast mounting of the damper

— Show original

Good Muzzle Brake

— Show original

Works well as a mouth brake, but poor execution. The entire block, or also the threaded parts, is phosphated, which changes the dimensions of the thread. Secondly, the mouth brake part starts to rotate easily. Practically requires a hard threadlocker that stays in place. The borelock function itself works as planned.

Handles recoil really good.

— Show original

I don't want the locking screw to stay in place. Otherwise no complaints.

— Show original

Good comp. No need for shims. Definitely necessary if you are considering a BL muffler.

Very sturdy, good mounting method.

— Show original

Works well

— Show original

I haven’t gotten to shoot with the muffler yet, but without the muffler at least it works just fine.

— Show original

The screw that holds the mouth brake rotation mechanism in place loosens continuously and the mouth brake can rotate inside the damper. Annoying.

— Show original

Works.

— Show original

A handy silencer that gets easily on / off. Convenient if you shoot from time to time in places where a comp is forbidden.

— Show original

Mounting complex, it is not worth throwing instructions in the corner

— Show original

Reasonably good basic brake, correct position should be ensured with a lock. The most important feature is the quick attachment of the damper.

— Show original

Good and functional Muzzle Brake for AR-15 rifles. Reduces the already low .223 recoil to a minimum. The foot brake has a position locking mechanism that makes it easy to direct the brake to the correct position, so there is no need to use Crush washers. It is a good idea to put a little lock on the locking mechanism screw during installation so that the brake stays in the correct position. Works great with the ASE UTRA JET-Z CQBS-BL muffler and thanks to the fastening mechanism, attaching and removing the muffler is quick.

— Show original

Powerful comp, easy to steer thanks to a separate position lock. A good system-> can use the same attenuator in multiple widgets with a BL comp. A bit of a problem with the compil position lock (retaining screw) but a harder lock helped. Otherwise feeling good.