ElérhetőségAzonnal. Ebből a termékből csak annyit rendelhetsz, amennyi raktáron van. A termék gyártása megszűnt.
Tárolókapacitás
Termékleírás
The Tango 3:2, made with 100% Yamamoto neoprene, offers the highest elasticity and thermal insulation of its thickness category, thanks to its internally sealed seams. Its front zip construction with a YKK zipper creates the best seal in the neck area without sacrificing freedom of movement in the shoulder area. Yamamoto 40 neoprene, exclusive to the high-end range, is also incorporated into the shoulders and back for greater paddling mobility. Finally, the combination of Yamamoto 3 mm neoprene and the Power Fit inner lining creates an ideal fit in the torso area, for added comfort as you enjoy the waves.
The suit's perfect fit in the chest and back is achieved thanks to the use of DS40PF technology, which includes a compressive inner lining. This lining and the Smoothskin finish on the wrists and neck prevent the ingress of water and the formation of air pockets in the wetsuit. The use of GBS seams covered by inner taping give the Tango 3:2 suit a high level of thermal insulation within its thickness category, preventing the loss of body heat and allowing you to surf for longer. The DuraSkin outer fabric, which is highly resistant to abrasion, ensures the durability of your suit, despite the many hours you spend on your surfboard. The inner taping also reinforces the seams and the Shield + panels cover and protect the knee area so that you can enjoy your wetsuit for a longer time.
- Superior elasticity
- Perfect fit
- Durable
Care instructions
Cleaning
Neoprene can be damaged by excess salt or other chemicals such as chlorine if used in swimming pools. We recommend washing your wetsuit with plenty of water after use. A small amount of neutral pH soap can be used and then rinsed out afterwards.
Once clean, be sure to prevent it from holding on to too much moisture. Air dry it outside or in a ventilated indoor space, somewhere without direct exposure to sunlight as this can damage its materials.
Storage
Storing your wetsuit properly keeps the materials and seams from creasing and being strained for long periods of time. It also prevents the material from wrinkling, which can affect both the wetsuit's durability and appearance.
The best way to store a wetsuit is to hang it draped from its waist, so that the most delicate areas such as the shoulders and arms do not have any tension on them.
For wetsuits with very flexible shoulders, (Apex Flex or Apex Flow) it is important not to place them on a hanger from the shoulder area, as this will degrade the elasticity over time. For the rest of the models, a wide hanger can be used, as long as the wetsuit is not strained in the shoulder or neck area.
Becsült csomagolt méret vagy a csomagolási egység becsült értéke 330 x 120 x 480 mm.
CipzárFront ZipKapucniNemNemFérfiakVastagság3 mm
Súly1,5 kg(A termék rendelkezhet könnyű kiskereskedelmi csomagolással.)
Garanciaidő12 hónap
HozzászólásokKérjük, írd meg saját észrevételedet!
Termékmárka